Saturday, 21 November 2026

E-Way Bill Rules: Rs 50,000 Limit, Validity, Part A/B, Penalties

A practical guide to e-way bills for Indian businesses: when you need one, how validity works, how to generate it and what happens if goods move without it.

Shinu · 11 min read
E-Way Bill Rules: Rs 50,000 Limit, Validity, Part A/B, Penalties

An e-way bill is required when you move goods worth more than Rs 50,000 in one consignment by motor vehicle, and it has two parts: Part A for the invoice and goods details, Part B for the vehicle or transport document. This guide explains when you need one, how validity is worked out from distance, how to generate it step by step, and what happens if a truck is stopped without it.

Key Takeaways

  • The national threshold is a consignment value above Rs 50,000 (including tax). Several states use a higher limit for movement inside the state, so check your state’s notification.
  • Part A carries the invoice, GSTINs, HSN and value. Part B carries the vehicle number. The e-way bill is only complete once Part B is filled.
  • Validity for normal cargo is one day for every 200 km or part of it, and one day per 20 km for over-dimensional cargo. Validity starts from the first Part B entry.
  • You can cancel within 24 hours, the recipient can reject within 72 hours, and extension is allowed from 8 hours before to 8 hours after expiry.
  • Moving goods without a valid e-way bill can lead to detention of the goods and vehicle and a penalty under Section 129 of the CGST Act, which can reach 200% of the tax payable.

What an e-way bill is and why it exists

The e-way bill (electronic way bill) is a document generated on the government’s e-way bill portal for the movement of goods. It was rolled out nationally for inter-state movement from 1 April 2018 and for intra-state movement in phases after that. The legal basis is Section 68 of the CGST Act read with Rule 138 of the CGST Rules, 2017.

Before GST, trucks queued at state check-posts while officers checked paper invoices. Now the department can see in advance what is moving, between whom and in which vehicle. For a small trader or D2C brand, the e-way bill is what keeps goods from being detained on a highway, and its data is cross-checked against GST returns.

When an e-way bill is required

Under Rule 138, an e-way bill is needed when a registered person causes movement of goods of consignment value exceeding Rs 50,000. The movement can be:

  • in relation to a supply (a sale, a branch transfer, a barter),
  • for reasons other than a supply (sending goods for job work, returning goods, sending samples or goods for exhibition), or
  • because of an inward supply from an unregistered person.

Consignment value means the value declared on the invoice, bill of supply or delivery challan, including CGST, SGST, IGST and cess, but excluding the value of exempt goods billed on the same invoice.

Two cases where the value limit does not apply

For inter-state movement of goods sent by a principal to a job worker, and for inter-state movement of handicraft goods by a person exempt from registration, an e-way bill is required even if the value is below Rs 50,000. Many small exporters of handicrafts and many units that outsource stitching, polishing or machining to job workers in another state miss this.

State limits for movement inside a state

Rule 138 lets states notify their own limit for intra-state movement. Several states have set a higher figure (Rs 1 lakh is common), and some have exempted movement within a city. These notifications change from time to time, so check your state GST department’s website before you rely on a higher limit. The Rs 50,000 rule always applies once goods cross a state border.

Common exemptions

You do not need an e-way bill in a few situations, including:

  • goods moved by a non-motorised conveyance such as a handcart or cycle rickshaw,
  • goods listed in the annexure to Rule 138, such as LPG for household use, kerosene sold under PDS, currency and used personal and household effects,
  • goods that are fully exempt from GST under the exemption notifications,
  • goods moved from a port, airport, air cargo complex or land customs station to an inland container depot or container freight station for customs clearance,
  • empty cargo containers being moved for transport purposes.

Who generates the e-way bill

Situation Who should generate Notes
Registered supplier sends goods in own vehicle or hired vehicle Supplier (consignor) Fills Part A and Part B
Registered buyer arranges transport and collects goods Buyer (consignee) or supplier Either can generate; agree in advance who will
Goods handed to a transporter, supplier fills only Part A Transporter completes Part B Supplier assigns the bill to the transporter’s ID
Purchase from an unregistered person Registered buyer Buyer is treated as supplier for e-way bill
E-commerce or courier movement Supplier, or the e-commerce operator / courier on their behalf Depends on the contract and who causes movement

If the supplier has not generated the e-way bill and the value is above the limit, the transporter is required to generate it based on the invoice handed over. Unregistered transporters can enrol on the portal and get a 15-digit transporter ID (TRANSIN) to do this.

Part A and Part B explained

The form is FORM GST EWB-01. Think of it as a two-section document.

Part A: the goods

  • GSTIN of the supplier and the recipient (use “URP” for an unregistered party),
  • place of dispatch and place of delivery with PIN codes,
  • document type and number (tax invoice, bill of supply, delivery challan) and date,
  • HSN code of the goods,
  • value of goods and tax amounts,
  • reason for transportation (supply, job work, export, SKD/CKD, sales return and so on),
  • transporter ID and approximate distance.

Part B: the vehicle

Part B is the vehicle number for road transport, or the transport document number (railway receipt, airway bill, bill of lading) for rail, air or ship. The e-way bill FAQ is clear on this: only when you enter the Part B details is the e-way bill actually generated. Until then, you just have a Part A slip.

There is one relief. When goods are moved less than 50 km within the same state from the consignor’s place of business to the transporter’s place, or from the transporter’s place to the consignee, the vehicle number in Part B is not mandatory.

If the goods are transferred to another vehicle on the way, the transporter updates Part B with the new vehicle number. The bill number stays the same. Taxpayers who issue e-invoices can generate the e-way bill using the IRN, which fills Part A automatically.

Validity: how many days you get

Rule 138(10) links validity to distance. For normal cargo, you get one day for every 200 km or part of it. For over-dimensional cargo (goods that exceed the dimension limits under the motor vehicle rules), you get one day for every 20 km or part of it. The 200 km figure has applied since 2021; older material, including some portal FAQs, still mentions 100 km, so do not be confused by it.

Approximate distance Normal cargo validity Over-dimensional cargo validity
Up to 200 km 1 day 10 days
201 to 400 km 2 days 11 to 20 days
401 to 600 km 3 days 21 to 30 days
1,000 km 5 days 50 days
1,450 km (a long interstate haul) 8 days 73 days

When the clock starts

According to the official FAQ, validity starts when the first entry is made in Part B, meaning the vehicle number is entered for the first time. It is not recalculated when Part B is later updated for a vehicle change.

A “day” ends at midnight. If an e-way bill for 150 km gets its first Part B entry at 11:30 p.m. on 22 November, it stays valid until midnight of 23 November.

Worked example

For example, a spice trader in Rajkot sends a Rs 2.4 lakh consignment to a wholesaler in Pune, roughly 700 km by road. Validity is four days (three full 200 km blocks plus one block for the remaining 100 km). If the truck breaks down near Nashik and the bill is about to expire, the transporter can extend it. If the vehicle is replaced, Part B is updated with the new number.

Document date and maximum life

GSTN has introduced two limits that started applying from 1 January 2025, according to its advisories as reported by multiple compliance publishers: an e-way bill can only be generated for documents dated up to 180 days before the generation date, and the total life of an e-way bill including extensions cannot exceed 360 days from its original generation. If you keep old invoices pending in the warehouse for months, this matters.

How to generate an e-way bill: step by step

  1. Register on the portal. Go to the official e-way bill portal and register once using your GSTIN. You will get an OTP on the mobile number linked to your GST registration.
  2. Keep the documents ready. Have the invoice, bill of supply or delivery challan, the recipient’s GSTIN and PIN code, HSN codes and the transporter ID or vehicle number.
  3. Open “Generate New”. Choose transaction type (outward or inward), sub-type (supply, job work, export and so on) and document type.
  4. Fill Part A. Enter document number and date, consignor and consignee details, item details with HSN, taxable value and tax rates. Check that the PIN codes are right, because the portal uses them to suggest distance.
  5. Enter distance and transport details. Enter the approximate distance (the portal checks it against PIN code distance and allows only a limited margin above it). Choose mode of transport.
  6. Fill Part B. Enter the vehicle number, or the transport document number for rail, air or ship. If a transporter will fill this, enter their transporter ID instead and submit Part A.
  7. Submit and print. The system generates a 12-digit e-way bill number (EBN). Give the driver the number or a printout; a soft copy or the EBN is enough for verification.

You can also generate e-way bills by SMS, mobile app, bulk JSON upload or API integration with accounting software.

Consolidated e-way bill

A transporter carrying several consignments in one truck can generate a consolidated e-way bill (FORM GST EWB-02) that lists all the individual e-way bill numbers. The driver then carries one document instead of a stack.

Cancelling, rejecting and extending

Action Who Time limit
Cancel The person who generated it Within 24 hours of generation, and only if not verified by an officer
Reject The other party (recipient or supplier) Within 72 hours of generation or delivery, whichever is earlier; after that it is treated as accepted
Extend The current transporter or generator From 8 hours before to 8 hours after expiry
Update Part B Generator or assigned transporter Any time while valid

An e-way bill cannot be edited. If Part A has a wrong GSTIN, value or HSN, cancel it within 24 hours and generate a fresh one.

Extension is meant for genuine reasons such as breakdowns, accidents or trans-shipment. You enter the reason, current place and remaining distance, and validity is added for that distance.

Penalties and what happens at an inspection

A proper officer can stop a vehicle and ask for the e-way bill and the invoice or challan. If goods are moving without a valid e-way bill, or the documents do not match the goods, the officer can detain the goods and the vehicle under Section 129 of the CGST Act.

After the 2021 amendments to Section 129, the penalty for release of taxable goods is generally:

  • If the owner of the goods comes forward: 200% of the tax payable on the goods.
  • If the owner does not come forward: the higher of 50% of the value of the goods or 200% of the tax payable.

Separately, Section 122 provides a penalty of Rs 10,000 or the tax evaded, whichever is higher, for transporting taxable goods without the prescribed documents. A detained truck also costs money every day it stands still.

There is also Rule 138E. If a taxpayer fails to file GSTR-3B (or the composition statement in CMP-08) for two consecutive tax periods, the portal blocks that GSTIN from generating e-way bills until the returns are filed. This catches many small businesses by surprise during a cash crunch.

Penalty provisions and rates change through notifications and Finance Acts. Treat these figures as a general guide and check the current law or a GST practitioner if you are dealing with an actual detention.

Mistakes that cause trouble (and the fix)

  • Vehicle number typo. One wrong character is enough for a detention notice. Copy the number from the RC, not from the driver’s memory.
  • Splitting invoices to stay under Rs 50,000. The limit applies to the consignment in the vehicle, and deliberate splitting is the kind of pattern officers look for. Generate the bill.
  • Forgetting job work bills. Inter-state job work movement needs an e-way bill at any value.
  • Letting the bill expire in a godown. If goods sit at a transporter’s hub, track expiry and extend within the 8-hour window.

A simple dispatch checklist

  1. Invoice or challan printed and checked (GSTIN, HSN, value, PIN codes).
  2. Consignment value above your applicable limit? Generate the e-way bill.
  3. Part B filled with the correct vehicle number.
  4. Validity noted on the dispatch register.
  5. Driver has the EBN on paper or phone, plus the invoice copy.
  6. GSTR-3B filed on time so generation is not blocked next month.

If you need to check tax on an invoice before generating the bill, our GST calculator helps you work out tax-inclusive values quickly.

Frequently Asked Questions

Is an e-way bill required for goods below Rs 50,000?

Usually not, except for inter-state movement for job work and inter-state movement of handicraft goods by exempt persons, where it is required at any value. Some states also have their own rules for specific goods.

Does the Rs 50,000 limit include GST?

Yes. The consignment value includes CGST, SGST, IGST and cess, but excludes the value of exempt goods on the same invoice.

Can I edit an e-way bill after generating it?

No. You can only update Part B (vehicle details). For any error in Part A, cancel within 24 hours and generate a new bill.

What is the validity of an e-way bill for 250 km?

Two days for normal cargo: one day for the first 200 km and one more day for the remaining 50 km. Validity starts from the first Part B entry and each day ends at midnight.

Can an unregistered person generate an e-way bill?

An unregistered person can enrol on the portal as a citizen to generate an e-way bill for their own movement. Unregistered transporters can enrol and get a transporter ID.

Why can’t I generate an e-way bill for my GSTIN?

The most common reason is Rule 138E blocking after two consecutive periods of non-filing of GSTR-3B (or CMP-08 for composition dealers). File the pending returns and generation is usually restored.

Make it a routine, not a scramble

E-way bill compliance is easy when it is part of the dispatch process: invoice, e-way bill, vehicle check, then the truck leaves. Keep your HSN codes and customer PIN codes clean in your billing software, file GSTR-3B on time, and keep an eye on validity for long-haul loads. For the latest rules and advisories, the e-way bill FAQ and the CBIC website are the places to check. When you reach a milestone worth announcing, such as opening a new warehouse or a new state, our guide to press release distribution in India explains how to share the news.

Leave a Reply

Your email address will not be published. Required fields are marked *